Strain-modulated defect engineering of two-dimensional materials
Santra, Prosun; Ghaderzadeh, Sadegh; Ghorbani-Asl, Mahdi; Komsa, Hannu-Pekka; Besley, Elena; Krasheninnikov, Arkady V. (2024-05-07)
Springer
07.05.2024
Santra, P., Ghaderzadeh, S., Ghorbani-Asl, M. et al. Strain-modulated defect engineering of two-dimensional materials. npj 2D Mater Appl 8, 33 (2024). https://doi.org/10.1038/s41699-024-00472-x.
https://creativecommons.org/licenses/by/4.0/
© The Author(s) 2024. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
https://creativecommons.org/licenses/by/4.0/
© The Author(s) 2024. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
https://creativecommons.org/licenses/by/4.0/
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:oulu-202405153510
https://urn.fi/URN:NBN:fi:oulu-202405153510
Tiivistelmä
Abstract
Strain- and defect-engineering are two powerful approaches to tailor the opto-electronic properties of two-dimensional (2D) materials, but the relationship between applied mechanical strain and behavior of defects in these systems remains elusive. Using first-principles calculations, we study the response to external strain of h-BN, graphene, MoSe2, and phosphorene, four archetypal 2D materials, which contain substitutional impurities. We find that the formation energy of the defect structures can either increase or decrease with bi-axial strain, tensile or compressive, depending on the atomic radius of the impurity atom, which can be larger or smaller than that of the host atom. Analysis of the strain maps indicates that this behavior is associated with the compressive or tensile local strains produced by the impurities that interfere with the external strain. We further show that the change in the defect formation energy is related to the change in elastic moduli of the 2D materials upon introduction of impurity, which can correspondingly increase or decrease. The discovered trends are consistent across all studied 2D materials and are likely to be general. Our findings open up opportunities for combined strain- and defect-engineering to tailor the opto-electronic properties of 2D materials, and specifically, the location and properties of single-photon emitters.
Strain- and defect-engineering are two powerful approaches to tailor the opto-electronic properties of two-dimensional (2D) materials, but the relationship between applied mechanical strain and behavior of defects in these systems remains elusive. Using first-principles calculations, we study the response to external strain of h-BN, graphene, MoSe2, and phosphorene, four archetypal 2D materials, which contain substitutional impurities. We find that the formation energy of the defect structures can either increase or decrease with bi-axial strain, tensile or compressive, depending on the atomic radius of the impurity atom, which can be larger or smaller than that of the host atom. Analysis of the strain maps indicates that this behavior is associated with the compressive or tensile local strains produced by the impurities that interfere with the external strain. We further show that the change in the defect formation energy is related to the change in elastic moduli of the 2D materials upon introduction of impurity, which can correspondingly increase or decrease. The discovered trends are consistent across all studied 2D materials and are likely to be general. Our findings open up opportunities for combined strain- and defect-engineering to tailor the opto-electronic properties of 2D materials, and specifically, the location and properties of single-photon emitters.
Kokoelmat
- Avoin saatavuus [37645]
Ellei muuten mainita, aineiston lisenssi on https://creativecommons.org/licenses/by/4.0/