Multi-band terahertz anisotropic metamaterial absorber composed of graphene-based split square ring resonator array featuring two gaps and a connecting bar
Asgari, Somayyeh; Fabritius, Tapio (2024-03-29)
Springer
29.03.2024
Asgari, S., Fabritius, T. Multi-band terahertz anisotropic metamaterial absorber composed of graphene-based split square ring resonator array featuring two gaps and a connecting bar. Sci Rep 14, 7477 (2024). https://doi.org/10.1038/s41598-024-58142-3
https://creativecommons.org/licenses/by/4.0/
© The Author(s) 2024. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
https://creativecommons.org/licenses/by/4.0/
© The Author(s) 2024. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
https://creativecommons.org/licenses/by/4.0/
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:oulu-202404032528
https://urn.fi/URN:NBN:fi:oulu-202404032528
Tiivistelmä
Abstract
A multi-band anisotropic metamaterial absorber operating in the terahertz (THz) range is constructed using a graphene-based split square ring resonator array featuring two gaps and a connecting bar. The design is meticulously simulated through the finite element method (FEM) using CST Software. Subsequently, an equivalent circuit model (ECM) is introduced, leveraging impedance and transmission lines, and implemented with a rapid MATLAB code to evaluate the absorber’s behavior in the THz spectrum. The proposed absorber, dynamically adjustable through a one-layered resonator array, exhibits a strong linear dichroism response of 99% within a frequency range of 0.3–4 THz. The metamaterial has an absorption rate of 81% for one absorption band in transverse magnetic mode and its three absorption bands in transverse electric mode have an average of 99.3% in each absorption band with absorption over 99%. This absorber holds potential applications in polarization-sensitive devices and THz systems. The ECM model was established to provide an efficient analytical tool for assessing the absorber’s performance, and the FEM simulation results align well with those derived from the ECM.
A multi-band anisotropic metamaterial absorber operating in the terahertz (THz) range is constructed using a graphene-based split square ring resonator array featuring two gaps and a connecting bar. The design is meticulously simulated through the finite element method (FEM) using CST Software. Subsequently, an equivalent circuit model (ECM) is introduced, leveraging impedance and transmission lines, and implemented with a rapid MATLAB code to evaluate the absorber’s behavior in the THz spectrum. The proposed absorber, dynamically adjustable through a one-layered resonator array, exhibits a strong linear dichroism response of 99% within a frequency range of 0.3–4 THz. The metamaterial has an absorption rate of 81% for one absorption band in transverse magnetic mode and its three absorption bands in transverse electric mode have an average of 99.3% in each absorption band with absorption over 99%. This absorber holds potential applications in polarization-sensitive devices and THz systems. The ECM model was established to provide an efficient analytical tool for assessing the absorber’s performance, and the FEM simulation results align well with those derived from the ECM.
Kokoelmat
- Avoin saatavuus [34624]
Ellei muuten mainita, aineiston lisenssi on https://creativecommons.org/licenses/by/4.0/