Design thinking-driven development of a modular X-Band antenna using multi-material 3D printing
Myllymäki, S.; Hannila, E.; Kokkonen, M.; Jantunen, H.; Fabritius, T. (2023-08-22)
Springer
22.08.2023
Myllymäki, S., Hannila, E., Kokkonen, M. et al. Design thinking-driven development of a modular X-Band antenna using multi-material 3D printing. Int J Interact Des Manuf 18, 901–910 (2024). https://doi.org/10.1007/s12008-023-01504-4
https://creativecommons.org/licenses/by/4.0/
© The Author(s) 2023. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
https://creativecommons.org/licenses/by/4.0/
© The Author(s) 2023. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
https://creativecommons.org/licenses/by/4.0/
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:oulu-202311303450
https://urn.fi/URN:NBN:fi:oulu-202311303450
Tiivistelmä
Abstract
This study presents the development of a modular parasitic patch antenna using 3D printing and the Design Thinking (DT) methodology. The antenna structure, manufactured with insulating polycarbonate and conductive silver lines, incorporates a reflector, main antenna, and parasitic patch. The study demonstrates the successful application of DT and Design for Manufacture and Assembly (DfMA) principles in optimizing manufacturing efficiency and assembly effectiveness. Simulations and measurements confirm the satisfactory performance of the 3D printed antenna, with a minimum reflection coefficient of -15 dB, efficiency reaching up to 75%, and gain falling within the range of conventionally fabricated antennas. The integration of insulator and conductor materials in 3D printing facilitates the manufacturing of complex structures, while the modular design enables easy installation and customization. This research contributes to the advancement of 3D printing technology for microwave applications, offering cost-effective and efficient manufacturing solutions for industrial antenna production.
This study presents the development of a modular parasitic patch antenna using 3D printing and the Design Thinking (DT) methodology. The antenna structure, manufactured with insulating polycarbonate and conductive silver lines, incorporates a reflector, main antenna, and parasitic patch. The study demonstrates the successful application of DT and Design for Manufacture and Assembly (DfMA) principles in optimizing manufacturing efficiency and assembly effectiveness. Simulations and measurements confirm the satisfactory performance of the 3D printed antenna, with a minimum reflection coefficient of -15 dB, efficiency reaching up to 75%, and gain falling within the range of conventionally fabricated antennas. The integration of insulator and conductor materials in 3D printing facilitates the manufacturing of complex structures, while the modular design enables easy installation and customization. This research contributes to the advancement of 3D printing technology for microwave applications, offering cost-effective and efficient manufacturing solutions for industrial antenna production.
Kokoelmat
- Avoin saatavuus [41224]
Ellei muuten mainita, aineiston lisenssi on https://creativecommons.org/licenses/by/4.0/