Hyppää sisältöön
    • FI
    • ENG
  • FI
  • /
  • EN
OuluREPO – Oulun yliopiston julkaisuarkisto / University of Oulu repository
Näytä viite 
  •   OuluREPO etusivu
  • Oulun yliopisto
  • Avoin saatavuus
  • Näytä viite
  •   OuluREPO etusivu
  • Oulun yliopisto
  • Avoin saatavuus
  • Näytä viite
JavaScript is disabled for your browser. Some features of this site may not work without it.

ABCS antenna for wireless body area network at 26 GHz

Afifi, Muhammad; Azemi, Saidatul Norlyana; Amir, Amiza; Soh, Ping Jack (2023-10-06)

 
Avaa tiedosto
nbnfi-fe20231107143461.pdf (470.2Kt)
nbnfi-fe20231107143461_meta.xml (49.60Kt)
nbnfi-fe20231107143461_solr.xml (39.36Kt)
Lataukset: 

URL:
https://doi.org/10.1063/5.0167687

Afifi, Muhammad
Azemi, Saidatul Norlyana
Amir, Amiza
Soh, Ping Jack
AIP Publishing
06.10.2023

Muhammad Afifi, Saidatul Norlyana Azemi, Amiza Amir, Soh Ping Jack; ABCS antenna for wireless body area network at 26 GHz. AIP Conf. Proc. 6 October 2023; 2579 (1): 020022. https://doi.org/10.1063/5.0167687

https://rightsstatements.org/vocab/InC/1.0/
© 2023 Authors. Published by AIP Publishing. This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. The following article appeared in Muhammad Afifi, Saidatul Norlyana Azemi, Amiza Amir, Soh Ping Jack; ABCS antenna for wireless body area network at 26 GHz. AIP Conf. Proc. 6 October 2023; 2579 (1): 020022, and may be found at https://doi.org/10.1063/5.0167687
https://rightsstatements.org/vocab/InC/1.0/
doi:https://doi.org/10.1063/5.0167687
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe20231107143461
Tiivistelmä

Abstract

The paper presents the design and investigation of a wearable textile antenna (receiver) and transmitter antenna operating in the wireless body area network (WBAN) of 26 GHz band for 5G mobile networks. The wearable antenna with an overall size of 30 mm x 40 mm x 1.26 mm achieves good impedance matching, high gain, and directive radiation pattern. Both antennas were designed using CST Microwave Studio to validate the simulation results. A rectangular radiating patch comprises a Shieldit electrotextile situated on one side of a non-conductive substrate panel with the ground plane. The bed sheet cotton fabric is used as the non-conductive substrate due to its widespread use in daily clothing with a dielectric constant is 3.2 and the loss tangent is 0.0027. In addition, the wearable antenna successfully achieved the high gain and efficiency of 12 dB and 90.83% respectively. Moreover, the antenna operating at 26 GHz with -40.48 dB return loss, which is less than the -10 dB in requirement. The simulated results show that this proposed wearable antenna is best suited for wireless body area network applications. Hence, the wearable antenna is simple, compact and easy to fabricate.

Kokoelmat
  • Avoin saatavuus [37683]
oulurepo@oulu.fiOulun yliopiston kirjastoOuluCRISLaturiMuuntaja
SaavutettavuusselosteTietosuojailmoitusYlläpidon kirjautuminen
 

Selaa kokoelmaa

NimekkeetTekijätJulkaisuajatAsiasanatUusimmatSivukartta

Omat tiedot

Kirjaudu sisäänRekisteröidy
oulurepo@oulu.fiOulun yliopiston kirjastoOuluCRISLaturiMuuntaja
SaavutettavuusselosteTietosuojailmoitusYlläpidon kirjautuminen