Correlation of aluminum doping and lithiation temperature with electrochemical performance of LiNi₁-ₓAlₓO₂ cathode material
Välikangas, Juho; Laine, Petteri; Hietaniemi, Marianna; Hu, Tao; Selent, Marcin; Tynjälä, Pekka; Lassi, Ulla (2022-12-23)
Välikangas, J., Laine, P., Hietaniemi, M. et al. Correlation of aluminum doping and lithiation temperature with electrochemical performance of LiNi₁-ₓAlₓO₂ cathode material. J Solid State Electrochem 27, 641–654 (2023). https://doi.org/10.1007/s10008-022-05356-y
© The Author(s) 2022. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
https://creativecommons.org/licenses/by/4.0/
https://urn.fi/URN:NBN:fi-fe2023060953594
Tiivistelmä
Abstract
This article presents a process for producing LiNi₁-ₓAlₓO₂ (0 < × < 0.05) cathode material with high capacity and enhanced cycle properties of 145 mAh/g after 600 cycles. The LiNi₁-ₓAlₓO₂ (0 < × < 0.05) cathode material is prepared by mixing coprecipitated Ni(OH)₂ with LiOH and Al(OH)₃, followed by lithiation at temperature range of 650–710 °C, after which any residual lithium from lithiation is washed from the particle surfaces. Electrochemical performance was studied within full-cell and half-cell application; in addition, different material characterization methods were carried out to explain structure changes when certain amount of aluminum is introduced in the LiNi₁-ₓAlₓO₂ structure. Surface analyses were carried out to demonstrate how washing process changes the chemical environment of the LiNi₁-ₓAlₓO₂ secondary particle surface. The results demonstrate how Al doping, lithiation temperature, and the washing process affect the performance of the LiNi₁-ₓAlₓO₂ cathode material.
Kokoelmat
- Avoin saatavuus [38670]
