A new processing route to develop nano-grained structure of a TRIP-aided austenitic stainless-steel using double reversion fast-heating annealing

Abstract

<div lang="en" class="abs"><p class="abs_header">Abstract</p><p>A novel processing route comprising double reversion annealing (DRA) was designed for developing bulk nano-grained (NG) structure of an austenitic stainless steel (Type 301LN). The new processing concept of DRA comprised two subsequent intrinsic type processes i.e., two times cold reductions (∼53 % and 63 %) followed by fast induction heating (∼200 °C/s) and short duration annealing at different temperatures (first at 690 °C/60s and second at 750–900 °C/0.1–1s). The NG structure revealed a remarkable improvement of the mechanical properties compared to the counterparts processed by single reversion annealing. Furthermore, outstanding combination of strength and formability is achieved for the DRA structures, significantly higher than those of high-Mn TWIP steels, low-alloy TRIP steels and 304 stainless steel. For instance, a superior combination of yield strength (∼950–1030 MPa) and formability index (11.8–12.5 mm) obtained after DRA at 750 °C/0.1s and 800°C/1 s, respectively. However, the corresponding values are 300 MPa and 12 mm for TWIP steels, 500 MPa and 10 mm for TRIP steels, and 270 MPa and 12 mm for 304 stainless steel. In order to reveal the effect of DRA on the stretch formability, Erichsen cup testing was conducted of both the initial and DRA steel specimens. Moreover, Erichsen cup testing also simulated by the finite element method (FEM) to survey further details of their deformation.</p></div>