Hyppää sisältöön
    • FI
    • ENG
  • FI
  • /
  • EN
OuluREPO – Oulun yliopiston julkaisuarkisto / University of Oulu repository
Näytä viite 
  •   OuluREPO etusivu
  • Oulun yliopisto
  • Avoin saatavuus
  • Näytä viite
  •   OuluREPO etusivu
  • Oulun yliopisto
  • Avoin saatavuus
  • Näytä viite
JavaScript is disabled for your browser. Some features of this site may not work without it.

Determination of the refractive index of particles through the immersion solid matching method

Niskanen, Ilpo; Lauri, Janne; Yokota, Masayuki; Heikkilä, Rauno; Hashimoto, Taro; Fabritius, Tapio (2020-08-12)

 
Avaa tiedosto
nbnfi-fe202103298636.pdf (1.093Mt)
nbnfi-fe202103298636_meta.xml (40.87Kt)
nbnfi-fe202103298636_solr.xml (35.78Kt)
Lataukset: 

URL:
https://doi.org/10.1109/TIM.2020.3016070

Niskanen, Ilpo
Lauri, Janne
Yokota, Masayuki
Heikkilä, Rauno
Hashimoto, Taro
Fabritius, Tapio
Institute of Electrical and Electronics Engineers
12.08.2020

I. Niskanen, J. Lauri, M. Yokota, R. Heikkilä, T. Hashimoto and T. Fabritius, "Determination of the Refractive Index of Particles Through the Immersion Solid Matching Method," in IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1-5, 2021, Art no. 6000505, doi: 10.1109/TIM.2020.3016070

https://rightsstatements.org/vocab/InC/1.0/
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
https://rightsstatements.org/vocab/InC/1.0/
doi:https://doi.org/10.1109/TIM.2020.3016070
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe202103298636
Tiivistelmä

Abstract

We describe a new measurement technique to determine the refractive index (RI) of solid particles by monitoring the simultaneous scattering of light from suspension with a camera and the value of the RI with a refractometer. Our immersion solid matching method is based on the solidification process of the liquid continuously changing the RI as a function of time. The principle of the determination is based on finding the RI matching point of the particle and the liquid during the solidification. The traditional liquid immersion method is based on a set of immersion liquids with different refractive indices, while the proposed method requires only a small amount of a single immersion liquid. The method was tested using calcium fluoride (CaF 2 ) particles with a varnish immersion liquid. The RI value of CaF 2 was obtained to be consistent with the literature values, thus indicating the proper functioning of the proposed procedure.

Kokoelmat
  • Avoin saatavuus [38865]
oulurepo@oulu.fiOulun yliopiston kirjastoOuluCRISLaturiMuuntaja
SaavutettavuusselosteTietosuojailmoitusYlläpidon kirjautuminen
 

Selaa kokoelmaa

NimekkeetTekijätJulkaisuajatAsiasanatUusimmatSivukartta

Omat tiedot

Kirjaudu sisäänRekisteröidy
oulurepo@oulu.fiOulun yliopiston kirjastoOuluCRISLaturiMuuntaja
SaavutettavuusselosteTietosuojailmoitusYlläpidon kirjautuminen