Hyppää sisältöön
    • FI
    • ENG
  • FI
  • /
  • EN
OuluREPO – Oulun yliopiston julkaisuarkisto / University of Oulu repository
Näytä viite 
  •   OuluREPO etusivu
  • Oulun yliopisto
  • Avoin saatavuus
  • Näytä viite
  •   OuluREPO etusivu
  • Oulun yliopisto
  • Avoin saatavuus
  • Näytä viite
JavaScript is disabled for your browser. Some features of this site may not work without it.

Online quality assurance of microchannels in roll-to-roll by optical coherence tomography

Lauri, Janne; Liedert, Christina; Liedert, Ralph; Fabritius, Tapio (2020-06-30)

 
Avaa tiedosto
nbnfi-fe2020081148294.pdf (862.7Kt)
nbnfi-fe2020081148294_meta.xml (33.66Kt)
nbnfi-fe2020081148294_solr.xml (30.84Kt)
Lataukset: 

URL:
https://doi.org/10.1109/I2MTC43012.2020.9128465

Lauri, Janne
Liedert, Christina
Liedert, Ralph
Fabritius, Tapio
Institute of Electrical and Electronics Engineers
30.06.2020

J. Lauri, C. Liedert, R. Liedert and T. Fabritius, "Online Quality Assurance of Microchannels in Roll-to-Roll by Optical Coherence Tomography," 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Dubrovnik, Croatia, 2020, pp. 1-5, doi: 10.1109/I2MTC43012.2020.9128465

https://rightsstatements.org/vocab/InC/1.0/
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
https://rightsstatements.org/vocab/InC/1.0/
doi:https://doi.org/10.1109/I2MTC43012.2020.9128465
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2020081148294
Tiivistelmä

Abstract

Roll-to-roll (R2R) process is an emerging technology to manufacture printed electronics, microfluidics, biochemical sensors etc. The requirements for high quality and small tolerances at the manufacturing phase are of the essence for such products. To verify the quality and guarantee the high production yield, high speed, non-destructive testing methods are needed. In this paper, optical coherence tomography (OCT) device is used at the R2R-line to measure online hot embossed microchannel structures at speed of 1 m/min, which is typical for the hot embossing process. The channel’s width and shape are determined along the web. The applicability of OCT for topography measurements is demonstrated in an actual R2R environment.

Kokoelmat
  • Avoin saatavuus [38697]
oulurepo@oulu.fiOulun yliopiston kirjastoOuluCRISLaturiMuuntaja
SaavutettavuusselosteTietosuojailmoitusYlläpidon kirjautuminen
 

Selaa kokoelmaa

NimekkeetTekijätJulkaisuajatAsiasanatUusimmatSivukartta

Omat tiedot

Kirjaudu sisäänRekisteröidy
oulurepo@oulu.fiOulun yliopiston kirjastoOuluCRISLaturiMuuntaja
SaavutettavuusselosteTietosuojailmoitusYlläpidon kirjautuminen