Hyppää sisältöön
    • FI
    • ENG
  • FI
  • /
  • EN
OuluREPO – Oulun yliopiston julkaisuarkisto / University of Oulu repository
Näytä viite 
  •   OuluREPO etusivu
  • Oulun yliopisto
  • Avoin saatavuus
  • Näytä viite
  •   OuluREPO etusivu
  • Oulun yliopisto
  • Avoin saatavuus
  • Näytä viite
JavaScript is disabled for your browser. Some features of this site may not work without it.

Calculating the output power of photovoltaic cells on top of electric and hybrid electric vehicles

Schuss, Christian; Fabritius, Tapio; Eichberger, Bernd; Rahkonen, Timo (2019-09-09)

 
Avaa tiedosto
nbnfi-fe202003249003.pdf (245.9Kt)
nbnfi-fe202003249003_meta.xml (34.98Kt)
nbnfi-fe202003249003_solr.xml (33.78Kt)
Lataukset: 

URL:
https://doi.org/10.1109/I2MTC.2019.8826890

Schuss, Christian
Fabritius, Tapio
Eichberger, Bernd
Rahkonen, Timo
Institute of Electrical and Electronics Engineers
09.09.2019

C. Schuss, T. Fabritius, B. Eichberger and T. Rahkonen, "Calculating the Output Power of Photovoltaic Cells on Top of Electric and Hybrid Electric Vehicles," 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Auckland, New Zealand, 2019, pp. 1-6. doi: 10.1109/I2MTC.2019.8826890

https://rightsstatements.org/vocab/InC/1.0/
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
https://rightsstatements.org/vocab/InC/1.0/
doi:https://doi.org/10.1109/I2MTC.2019.8826890
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe202003249003
Tiivistelmä

Abstract

This paper investigates the potential output power of a photovoltaic (PV) installation on top of battery-powered electric vehicles (BEVs) and hybrid electric vehicles (HEVs). Firstly, we discuss the available area on the roof of BEVs and HEVs for deploying PV cells. Secondly, we verify the impact of the curved surface on the available output power of photovoltaics. Furthermore, we discuss the impact of the curved surface and the ambient conditions on the possible alignment of PV cells. Here, we present a method of calculating the effective area of PV cells, useful for PV simulation models and calculating the available output power of PV cells with different longitudinal angles. Finally, we verify our method within experiments and present the results of them, showing that the model predicts the output power of PV cells with an accuracy better than 2.5%.

Kokoelmat
  • Avoin saatavuus [37606]
oulurepo@oulu.fiOulun yliopiston kirjastoOuluCRISLaturiMuuntaja
SaavutettavuusselosteTietosuojailmoitusYlläpidon kirjautuminen
 

Selaa kokoelmaa

NimekkeetTekijätJulkaisuajatAsiasanatUusimmatSivukartta

Omat tiedot

Kirjaudu sisäänRekisteröidy
oulurepo@oulu.fiOulun yliopiston kirjastoOuluCRISLaturiMuuntaja
SaavutettavuusselosteTietosuojailmoitusYlläpidon kirjautuminen