Non-destructive characterization of glass laminated electronics
Lauri, Janne; Hannila, Esa; Fabritius, Tapio (2019-05-23)
J. Lauri, E. Hannila and T. Fabritius, "Non-Destructive Characterization of Glass Laminated Electronics," 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Auckland, New Zealand, 2019, pp. 1-5. doi: 10.1109/I2MTC.2019.8827057
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
https://rightsstatements.org/vocab/InC/1.0/
https://urn.fi/URN:NBN:fi-fe2019121648351
Tiivistelmä
Abstract
By integrating electronics inside the laminated glass, the windows and structural glass elements can be transformed to be functional and interactive. Once the electronics is embedded into the glass in lamination process, the electronics is exposed to different type of stresses, having an influence on performance and reliability. In order to understand the consequences of lamination and to explain the reason for failures, non-destructive optical coherence tomography (OCT) based method was used in this study. In addition, thermo-mechanical simulations were done to find possible causes for observed failures in light emitting device (LED) chips and wirings. Combining the analyzed OCT data with simulations, was shown to be very effective tool to select right materials and optimize the lamination process for glass embedded electronics.
Kokoelmat
- Avoin saatavuus [36513]