Link-level performance of FM-UWB in the interfered IEEE 802.15.6 channel

Viittala, Harri; Hämäläinen, Matti; Iinatti, Jari (2018-12-30)
 
Avaa tiedosto
Lataukset: 

URL:
https://doi.org/10.1007/978-3-030-02819-0_25

Viittala, Harri
Hämäläinen, Matti
Iinatti, Jari
Springer Nature
30.12.2018

Viittala H., Hämäläinen M., Iinatti J. (2019) Link-Level Performance of FM-UWB in the Interfered IEEE 802.15.6 Channel. In: Fortino G., Wang Z. (eds) Advances in Body Area Networks I. Internet of Things (Technology, Communications and Computing). Springer, Cham. https://doi.org/10.1007/978-3-030-02819-0_25

https://rightsstatements.org/vocab/InC/1.0/
© Springer Nature Switzerland AG 2019. This is a post-peer-review, pre-copyedit version of an article published in Advances in Body Area Networks I. Internet of Things (Technology, Communications and Computing), Internet of Things. The final authenticated version is available online at: https://doi.org/10.1007/978-3-030-02819-0_25.
https://rightsstatements.org/vocab/InC/1.0/
doi:https://doi.org/10.1007/978-3-030-02819-0_25
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2017101950198
Tiivistelmä

Abstract

This paper provides simulation results of the frequency modulated ultra wideband (FM-UWB) system with channel coding in an interfered IEEE 802.15.6 channel. The paper discusses a FM-UWB receiver structure and presents the developed simulator model. The receiver applies a delay-line modulator followed by an amplitude modulation projection detection. A channel model used is the IEEE 802.15.6 channel model 3 for an on-body link. An interference is modeled as a colored Gaussian noise presenting an in-band IEEE 802.15.4 interferer. The simulation results show that the FM-UWB system can tolerate as low as -6 dB signal-to-interference power ratios (SIR) in the studied scenarios.

Kokoelmat