A simultaneous wideband impedance matching and bandpass filtering technique using NUTL segments at 15 GHz

Shaheen, Rana A.; Sethi, A.; Akbar, R.; Aikio, Janne P.; Tuovinen, T.; Rahkonen, T.; Pärssinen, A. (2018-03-12)
 
Avaa tiedosto
Lataukset: 

URL:
https://doi.org/10.1109/WISNET.2018.8311567

Shaheen, Rana A.
Sethi, A.
Akbar, R.
Aikio, Janne P.
Tuovinen, T.
Rahkonen, T.
Pärssinen, A.
Institute of Electrical and Electronics Engineers
12.03.2018

R. A. Shaheen et al., "A simultaneous wideband impedance matching and bandpass filtering technique using NUTL segments at 15 GHz," 2018 IEEE Topical Conference on Wireless Sensors and Sensor Networks (WiSNet), Anaheim, CA, 2018, pp. 70-72. doi: 10.1109/WISNET.2018.8311567

https://rightsstatements.org/vocab/InC/1.0/
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
https://rightsstatements.org/vocab/InC/1.0/
doi:https://doi.org/10.1109/WISNET.2018.8311567
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2018121851146
Tiivistelmä

Abstract

This paper presents a simultaneous high-Q impedance matching and bandpass filtering technique for low-noise amplifiers (LNA) for radio frequency integrated circuit (RFIC) phased array system at 15 GHz, over the bandwidth of 1 GHz. A non-uniform transmission line (NUTL) segment is used as a major building block, which provides feasible integration for multiple antennas. A feeding network for single element receiver is demonstrated. The simulated and measured results show sufficient impedance matching of input feeds with S11 <; -10 dB over a relative bandwidth of 7% at 15 GHz.

Kokoelmat