Computational and experimental studies for probe ring radius in MIMO OTA test systems

Anin, Dmytro; Suzan, Miah; Salonen, Erkki (2017-07-17)
 
Avaa tiedosto
Lataukset: 

URL:
https://doi.org/10.1109/EuCNC.2017.7980766

Anin, Dmytro
Suzan, Miah
Salonen, Erkki
Institute of Electrical and Electronics Engineers
17.07.2017

D. Anin, M. M. Suzan and E. Salonen, "Computational and experimental studies for probe ring radius in MIMO OTA test systems," 2017 European Conference on Networks and Communications (EuCNC), Oulu, 2017, pp. 1-5. doi: 10.1109/EuCNC.2017.7980766

https://rightsstatements.org/vocab/InC/1.0/
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
https://rightsstatements.org/vocab/InC/1.0/
doi:https://doi.org/10.1109/EuCNC.2017.7980766
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2018073133184
Tiivistelmä

Abstract

The effect of the probe ring size in OTA test systems was studied based on simulations and OTA measurements in the anechoic chamber of the University of Oulu. The results are presented for two methodologies: Prefaded Synthesis (PFS) and Plane Wave Synthesis (PWS). Each size and synthesis type was validated for UMI and Uma radio channel models and for the cases the DUT in free space and in phantom hand.

Kokoelmat